Outline
Dexin NEP10 IP Gateway is a device which is used for the protocol conversion scenarios and streaming media distribution scenarios. It can convert the broadcast network IP stream over SRT, HTTP, UDP, RTP, RTSP and HLS protocol. The system can achieve the integration by receiving a variety of commercial streaming media services. Also, the system can provide streaming media services directly.
Key Features
* Ethernet1 for input and output (Recommend).
* Ethernet2 for input. Ethernet2 is only suitable for the simple network with low bit-rate.
* Ethernet port: IP in over SRT, HTTP, UDP, RTP/RTSP and HLS
IP out over SRT, HTTP, UDP, RTP/RTSP,HLS and RTMP
* Support IP anti-jitter function
* Support about 8-12 HD/SD programs (Bitrate:8Mbps) conversion.
* Control via web-based NMS management through Ethernet port
IP Protocol Conversion
General Principle Chart
Specifications
IP Input |
IP input through Ethernet1/ Ethernet2 over SRT, HTTP, UDP, RTP/RTSP and HLS. |
|
IP output |
IP output through Ethernet1 over SRT, HTTP, UDP, HLS, RTMP and RTP/RTSP. |
|
System |
Support about 8-12 HD/SD programs (Bitrate:8Mbps) conversion |
|
Web-based NMS management through Ethernet port |
||
General |
Demission |
180mm×110mm×40mm (WxLxH) |
Temperature |
0~45℃(operation), -20~80℃(storage) |
|
Power Supply |
AC100V±10%, 50/60Hz or AC 220V±10%, 50/60Hz |
Test data for reference:
Bit-Rate |
Programs |
|
UDP to SRT/HTTP/RTP/RTSP/HLS/RTMP |
3Mbps |
20 |
UDP to SRT |
8Mbps |
10 |
UDP to HTTP |
12 |
|
UDP to RTP/RTSP |
12 |
|
UDP to RTMP |
12 |
|
UDP to HLS |
12 |
Protocol conversion |
Bit-Rate |
Programs |
SRT to UDP/RTP/RTSP/HLS |
3Mbps |
20 |
SRT to UDP |
8Mbps |
12 |
SRT to RTP/RTSP |
12 |
|
SRT to HLS |
12 |